- 最新の発表論文はこちらをクリックしてください。
- Tomoki Nakai, Takuya Asami, and Hikaru Miura : Convergence of intense aerial acoustic waves radiated by a rectangular transverse vibrating plate, Japanese Journal of Applied Physics, Vol. 55, No. 7S1, 07KE09, June, 2016.
- Takuya Asami and Hikaru Miura : Longitudinal?torsional vibration source consisting of two transducers with different vibration modes, Japanese Journal of Applied Physics, Vol. 55, No. 7S1, 07KE08, June, 2016.
- Arisa Endo, Miduki Yanagimoto, Takuya Asami and Hikaru Miura : Noncontact atomization of droplets using an aerial ultrasonic source with two vibrating plates, Japanese Journal of Applied Physics, Vol. 54, No. 7S1, 07HE13, June, 2015.
- Koki Naito, Takuya Asami and Hikaru Miura : Formation of aerial standing wave field using ultrasonic sources consisting of multiple stripe-mode transverse vibrating plates, Japanese Journal of Applied Physics, Vol. 54, No. 7S1, 07HE07, June, 2015.
- Hikaru Miura, Masayuki Nakada, Takuya Asami : Increasing unsaturated dissolved oxygen concentration in water by fine bubbles induced by ultrasonic vibrations, Acoustical Science and Technology, Vol. 36, No. 3, pp. 240-247, 2015.
- Takuya Asami and Hikaru Miura : Ultrasonic welding of dissimilar metals by vibration with planar locus, Acoustical Science and Technology, Vol. 36, No. 3, pp. 232-239, 2015.
- Takuya Asami and Hikaru Miura : Charateristics of Hole Machining of Brittle Material by Ultrasonic Complex Vibration, Japanese Journal of Applied Physics, Vol. 51, No. 7, pp. 07GE07-1-7, July, 2012.
- Keisuke Matsumoto and Hikaru Miura : Enhanced Removal of Hydrophobic Gas by Aerial Ultrasonic Waves and Two Kinds of Water Mists of Different Particle Sizes, Japanese Journal of Applied Physics, Vol. 51, No. 7, pp. 07GE05-1-5, July, 2012.
- Takuya Asami and Hikaru Miura : Vibrator Development for Hole Machining by Ultrasonic Longitudinal and Torsional Vibration, Japanese Journal of Applied Physics, Vol. 50, No. 7, pp. 07HE31-1-9, July, 2011.
- Takuya Asami and Hikaru Miura, Longitudinal Vibration Characteristics Required to Cut a Circle by Ultrasonic Vibration, Japanese Journal of Applied Physics, Vol. 49, No. 7, pp. 07HE23-1-7, July, 2010.
- Hikaru Miura and Hitoshi Ishikawa, Longitudinal Aerial Ultrasonic Source Using Stripe-Mode Transverse Vibrating Plate with Jutting Driving Point, Japanese Journal of Applied Physics, Vol. 48, No. 7, pp. 07GM10-1-4, July, 2009.
- Hikaru Miura, Vibration Characteristics of Stepped Horn Joined Cutting Tip Employed in Circular Cutting Using Ultrasonic Vibration, Japanese Journal of Applied Physics, Vol. 47, No. 5, pp. 4282-4286, May, 2008.
- Hikaru Miura, Makoto Takata, Daisuke Tajima and Kenichirou Tsuyuki, Promotion of Methane Hydrate Dissociation by Underwater Ultrasonic Wave, Japanese Journal of Applied Physics, Vol. 45, No. 5B, pp. 4816-4823, May, 2006
- Yuu Onishi and Hikaru Miura, Convergence of Sound Waves Radiated from Aerial Ultrasonic Source Using Square Transverse Vibrating Plate with Several Reflective Boards, Japanese Journal of Applied Physics, Vol. 44, No. 6B, pp. 4682-4688, June, 2005.
- Hikaru Miura, Promotion of Sedimentation of Dispersed Fine Particles Using Underwater Ultrasonic Wave, Japanese Journal of Applied Physics, Vol. 43, No. 5B, pp. 2838-2839, May, 2004.
- Hikaru Miura, Eggshell Cutter Using Ultrasonic Vibration, Japanese Journal of Applied Physics, Vol. 42, No. 5B, pp. 2996-2999, May, 2003.
- 最新の研究発表はこちらををクリックしてください。
- 倉富 涼，吉野 春樹，浅見 拓哉，三浦 光 : 円筒剛壁一体構造のたわみ振動板型空中超音波音源に反射板を設置したときの指向性の検討, 日本音響学会春季研究発表会, 3-P-13, 2017年3月.
- 中山 怜，淺見 拓哉，三浦 光 : 空中超音波による非接触での砥粒を混ぜた液滴の含浸, 日本音響学会春季研究発表会, 3-P-11, 2017年3月.
- 佐藤 諒，淺見 拓哉，三浦 光 :矩形たわみ振動板と剛壁が一体構造の空中超音波音源の開発－二枚の縞モード振動板による定在波音場－, 日本音響学会春季研究発表会, 1-9-2, 2017年3月.
- Takuya Asami, Yusuke Higuchi, Hikaru Miura：Ultrasonic metal welding by longitudinal-torsional vibration source consisting of two transducers，5th ASA/ASJ Joing Meeting in Hawaii 2016，5pEA11，2016年12月.
- 樋口祐亮，淺見拓哉，三浦光：超音波複合振動を用いたアルミニウム板と銅板の接合 －接合時間と接合強度の関係－，塑性加工連合講演会, 133, 2016年10月
研究業績
